Art Work Common Terms

« | 1 | 2 | 3 | 4 | 5 |6 | 7| 8 | 9 | 10 | 11 | 12 | 13 | 141516 | 17 | 18| 19| 20| 21| 22| 23|24| 25| »


about us

Screen Printing: an image is transferred to the printed surface by ink, which is pressed through a stenciled screen and treated with
a light-sensitive emulsion. Film positives are put in contact with the screens andexposed to light, hardening the emulsion not
covered by film and leaving a soft area on the screen for the squeegee to press ink through. (Also called silk screening)

Pad Printing: a recessed surface is covered with ink. The plate is wiped clean, leaving ink in the recessed areas. A silicone pad is
then pressed against the plate, pulling the ink out of the recesses, and pressing it directly onto the product.

4-color Process: a system where a color image is separated into 4 different color values by the use of filters and screens (usually
done digitally). The result is a color separation of 4 images, that when transferred to printing plates and printed on a printing
press with the colored inks cyan (blue), magenta (red), yellow and black, reproduces the original color image. These four colors
can be combined to create thousands of colors.

Pantone Matching System (PMS): a book of standardized color in a fan format used to identify, match and communicate colors
in order to produce accurate color matches in printing. Each color has a coded number indicating instructions for mixing inks to
achieve that color.

Camera-ready: artwork that is black and white and has very clean, crisp lines that make it easy to scan and suitable for
photographic reproduction.

Bleeds: printers cannot print right to the edge of a paper sheet. To create that effect, the printer must use a sheet, which is larger
than the document size. Then the printer prints beyond the edge of the document size (usually 1/8?), then cuts the paper down to
the document size.

Imprint Area: the area on a product, with specific dimensions, in which the imprint is placed.

Paper proof: Impression of type or artwork on paper so the correctness and quality of the material to be printed can be checked.
The least expensive is a regular black and white faxed paper proof.

Pre-production Proof: an actual physical sample of the product itself produced and sent for approval before an order goes into

Drop Shipment: an order shipped to more than one location will be charged a fee for each additional destination.

Less than Minimum: the fee charged for ordering 50% fewer items than the quantity listed in the minimum or first column. This
option is not always available on all products.

Etching: using a process in which an image is first covered with a protective coating that resists acid, then exposed, leaving bare
metal and protected metal. The acid attacks only the exposed metal, leaving the image etched onto the surface.

Engraving: cutting an image into metal, wood or glass by one of three methods-computerized engraving, hand tracing, or hand engraving.

Color fill: screen printing an image and then debossing it onto the vinyl's surface Embroidery: stitching a design into fabric through the use of high-speed, computer-controlled sewing machines. Artwork must first be "digitized," which is the specialized
process of converting two-dimensional artwork into stitches or thread. A particular format of art such as a jpeg, tif, eps, or bmp, cannot be converted into an embroidery tape. The digitizer must actually recreate the artwork using stitches. Then it programs
the sewing machine to sew a specific design, in a specific color, with a specific type of stitch. This is the process known as

Debossing: depressing an image into a material's surface so that the image sits below the product surface

Embossing: impressing an image in relief to achieve a raised surface

Hot Stamp: setting a design on a relief die, which is then heated and pressed onto the printing surface

Laser or Foil Stamp: applying metallic or colored foil imprints to vinyl, leather or paper surfaces

Personalization: imprinting an item with a person's name using one of several methods such as mechanical engraving, laser
engraving, hot stamping, debossing, sublimation, or screen printing, to name a few

Die-casting: injecting molten metal into the cavity of a carved die (a mold)

Die-striking: producing emblems and other flat promotional products by striking a blank metal sheet with a hammer that holds the

If you need help with your art Work or Need Us to do your Art Work just let us know.

Priceless Designs 4uWe pride ourselves in working with our customers to create advertising solutions that best meet  their business or personal needs.
Priceless Designs 4UShop and Save with Priceless Designs 4U, Asheville NC
If you can't find what you are looking for, you can always request a quote. With over 6 million products, Priceless Designs 4U will look for the best deal for you or your business.
If you place your order and it's goes on sale Priceless Designs 4U will email you and let you know.
All orders are approved by customers before we email your invoice.
If you need help with your art Work or Need Us to Do your Art Work just let us know.

Need Help?

Priceless Designs 4uWe look forward to serving you. If you have any questions about our online store, artwork or any product, please don't hesitate to contact us any time.

Call or Texts 828-712-9120 | Toll Free or Fax 888-882-8236

T-Shirt Sale: Port & Company Organic T-Shirts

Hanes Nano-T Cotton T-Shirt Hanes Nano-T Cotton T-Shirt

   priceless designs 4u